Fluke 971 Temperature Humidity Meter - 081806120636

Fluke 971 Temperature Humidity Meter  - 081806120636

Specifications
Temperature	-20°C to 60°C (-4°F to 140°F)
Temperature accuracy	0°C to 45°C (±0.5°C)  -20°C to 0°C & 45°C to 60°C (±1.0°C)  32°F to 113°F (±1.0°F)  -4°F to 32°F & 113°F to 140°F (±2.0°F)
Resolution	0.1°C / 0.1°F
Temperature Update Rate	500 ms
Temperature Sensor Type	NTC
Relative Humidity Range	5% to 95% RH
Relative Humidity Accuracy	10% to 90%RH @ 23 °C (73.4°F) (±2.5%RH)  (<10%, > 90%RH @23°C (73.4°F) (±5.0%RH)
Humidity Sensor	Electronic capacitance polymer film sensor.
Data storage capacity	99 points
Response Time (Humidity)	For 90% of total range - 60 sec. with 1m/s air movement

Environmental Specifications
Operating Temperature	Temperature: -20°C to 60°C  Humidity: 0°C to 55°C
Storage Temperature	-20°C to 60°C at < 80% R.H. (with battery removed)

Mechanical & General Specifications
Weight	190 g (6.7 oz)
Dimensions	194mm x 60mm x 34mm
Battery type	4 AAA alkaline batteries
Battery Life	200 Hours

Fluke 922 Airflow Meter/Micromanometer - 081806120636 - 021.71601997

Fluke 922 Airflow Meter/Micromanometer - 081806120636 - 021.71601997

Technical Specifications
Air Pressure	Range/Resolution/Accuracy  ± 4000 Pascals / 1 Pascal / ± 1 % + 1 Pascal  ± 16 in H2O / 0.001 in H2O / ± 1 % + 0.01 in H2O  ± 400 mm H2O / 0.1 mm H2O / ± 1 % + 0.1 mm H2O  ± 40 mbar / 0.01 mbar / ± 1 % + 0.01 mbar  ± 0.6 PSI / 0.0001 PSI / ± 1 % + 0.0001 PSI
Air Velocity	Range/Resolution/Accuracy  250 to 16,000 fpm / 1 fpm / ± 2.5 % of reading at 2000 fpm (10.00 m/s)  1 to 80 m/s / 0.001 m/s / ± 2.5 % of reading at 2000 fpm (10.00 m/s)
Air Flow (Volume)	Range/Resolution/Accuracy  0 to 99,999 cfm / 1 cfm / Accuracy is a function of velocity and duct size  0 to 99,999 / 1 m3/hr / Accuracy is a function of velocity and duct size  0 to 99,999 l/s / 1 l/s / Accuracy is a function of velocity and duct size
Temperature	Range/Resolution/Accuracy  0 °C to 50 °C / ± 1 % + 2 °C / 0.1 °C  32 °F to 122 °F / ± 1 % + 4 °F / 0.1 °F

General Specifications
Operating Temperature	0 °C to +50 °C (+32 °F to +122 °F)
Storage Temperature	-40 °C to +60 °C (-40 °F to +140 °F)
Relative Humidity	0% to 90%, non-condensing
IP Rating	IP40
Operating Altitude	2000 m
Storage Altitude	12000 m
EMI, RFI, EMC	Meets requirements for EN61326-1
Vibration	MIL-PREF-28800F, Class 3
Max Pressure at Each Port	10 PSI
Data storage capacity	99 readings
Power, battery life	Four AA batteries
Battery Life	280 hours without backlight, 60 hours with backlight

Pemesanan Dan Informasi Hub. Harytan
021.71601997 - 0810806120636 - Pin.2975C3A4
Email.alatsurveykita61@gmail.com

Fluke 116 HVAC Multimeter with Temperature and Microamps - 081806120636

Fluke 116 HVAC Multimeter with Temperature and Microamps  - 081806120636

Specifications
Maximum voltage between any terminal and earth ground	600 V
Surge protection	6 kV peak per IEC 61010-1 600 V CAT III, Pollution Degree 2
Display	Digital:  6,000 counts, updates 4 per second
Bar graph	33 segments, updates 32 per second
Operating Temperature	-10 °C to + 50 °C
Storage Temperature	-40 °C to + 60 °C
Battery type	9 volt Alkaline, NEDA 1604A/ IEC 6LR61
Battery Life	400 hours typical, without backlight

Accuracy Specifications
DC millivolts	Range:  600.0 mV Resolution:  0.1 mV Accuracy:  ± ([% of reading] + [counts]): 0.5% + 2
DC volts	Range/Resolution:  6.000 V / 0.001 V Range/Resolution:  60.00 V / 0.01 V Range/Resolution:  600.00 V / 0.1 V Accuracy:  ± ([% of reading] + [counts]): 0.5% + 2
Auto volts	Range:  600.0 V Resolution:  0.1 V Accuracy:  2.0 % + 3 (dc, 45 Hz to 500 Hz) 4.0 % + 3 (500 Hz to 1 kHz)
AC millivolts1 true-rms	Range:  600.0 mV Resolution:  0.1 mV Accuracy:  1.0 % + 3 (dc, 45 Hz to 500 Hz) 2.0 % + 3 (500 Hz to 1 kHz)
AC volts1 true-rms	Range/Resolution:  6.000 V / 0.001 V Range/Resolution:  60.00 V / 0.01 V Range/Resolution:  600.0 V / 0.1 V Accuracy:  1.0 % + 3 (dc, 45 Hz to 500 Hz) 2.0 % + 3 (500 Hz to 1 kHz)
Continuity	Range:  600 Ω Resolution:  1 Ω Accuracy:  Beeper on < 20 Ω, off > 250 Ω; detects opens or shorts of 500 μs or longer.
Ohms	Range/Resolution:  600.0 Ω / 0.1 Ω Range/Resolution:  6.000 kΩ / 0.001 kΩ Range/Resolution:  60.00 kΩ / 0.01 kΩ Range/Resolution:  600.0 kΩ / 0.1 kΩ Range/Resolution:  6.000 MΩ / 0.001 MΩ Accuracy:  0.9 % + 1 Range/Resolution:  40.00 MΩ / 0.01 MΩ Accuracy:  1.5 % + 2
Diode Test	Range/Resolution:  2.000 V / 0.001 V Accuracy:  0.9% + 2
Capacitance	Range/Resolution:  1000 nF / 1 nF Range/Resolution:  10.00 μF / 0.01 μF Range/Resolution:  100.0 μF / 0.1 μF Range/Resolution:  9999 μF / 1 μF Range/Resolution:  100 μF to 1000 μF Accuracy:  1.9% + 2 Range/Resolution:  > 1000 μF Accuracy:  5% + 20%
LoZ capacitance	Range:  1 nF to 500 μF Accuracy:  10% + 2 typical
Temperature2 (Type-K thermocouple)	Range/Resolution:  -40 °C to 400 °C / 0.1 °C Accuracy:  1% + 102 Range/Resolution:  -40 °F to 752 °F / 0.2 °F Accuracy:  1% + 182
AC μamps true-rms (45 Hz to 500 Hz)	Range/Resolution:  600.0 μA / 0.1 μA Accuracy:  1.0% + 2
DC μamps	Range/Resolution:  600.0 μA / 0.1 μA Accuracy:  1.0% + 2
Hz (V or A input)2	Range/Resolution:  99.99 Hz / 0.01 Hz Range/Resolution:  999.99 Hz / 0.1 Hz Range/Resolution:  9.999 Hz / 0.001 Hz Range/Resolution:  50.00 Hz / 0.01 Hz Accuracy:  0.1% + 2

Notes:
1) All ac voltage ranges except Auto-V/LoZ are specified from 1 % to 100 % of range. Auto-V/LoZ is specified from 0.0 V.
2) Temperature uncertainty (accuracy) does not include the error of the thermocouple probe.
3) Frequency is ac coupled, 5 Hz to 50 kHz for ac voltage. Frequency is dc coupled, 45 Hz to 5 kHz for ac current.
4) Temperature Range/Resolution: -40 °F to 752 °F / 0.2 °F

Mechanical & General Specifications
Size	167 x 84 x 46 mm (6.57" x 3.31" x 1.82")
Weight	550 g

Pemesanan dan Informasi
Hub. Harytan  : 021.71601997 - 081806120636 - 2975C3A4
Fax.021.71601997 - Email.alatsurveykita61@gmail.com

Fluke 2042 Cable locator - 081806120636 - 021.71601997

Fluke 2042 Cable locator- 081806120636 - 2975C3A4 - Fax.021.7318012

Technical Specifications
Voltage measurement range	Transmitter:  12 V, 50 V, 120 V, 230 V, 400 V
Frequency range	Transmitter:  0...60 Hz
Output signal	Transmitter:  125 kHz
Voltage	Transmitter:  Up to 400 V AC/DC
Tracing depth cable location	Receiver:  0...2.5 m wall/underground cables
Main voltage detection	Receiver:  0...0.4 m

Environmental Specifications
Operating Temperature	Transmitter:  0 to 40°C Receiver:  0 to 40°C
Storage Temperature	Transmitter:  -20°C to +60°C Receiver:  -20°C to +60°C
Humidity (Without Condensation)	Transmitter:  Max. 80% relative Receiver:  Max. 80% relative
Operating Altitude	Transmitter:  Up to 2000 m Receiver:  Up to 2000 m

Safety Specifications
Electrical Safety	EN 61010-1
Overvoltage category	Cat. III 300 V

Mechanical & General Specifications
Size	Transmitter:  190 mm x 85 mm x 50 mm Receiver:  250 mm x 65 mm x 45mm
Weight	Transmitter:  0.45 kg Receiver:  0.36 kg
Batteries	Transmitter:  6 pc Batteries 1.5V Receiver:  1 pc Battery 9V

Cable Locator

4 test leads battery 9 V, IEC 6LR61 6 batteries 1.5 V, IEC LR^6 2 crocodile clamps 2 test probes carrying case user manual

Pemesanan Dan Informasi Hub. Harytan                   081806120636 - 021.71601997 - 2975C3A4  -  Fax.021.7318012 - Email. alatsurveykita61@gmail.com

Fluke 1AC-II / 1LAC-II VoltAlert - 081806120636 - 021.71601997

Fluke 1AC-II / 1LAC-II VoltAlert - 081806120636 - 021.71601997

Voltbeat™ technology and continuous self-test — so you always know it’s working

Upon detection, tip glows and beeper sounds

CAT IV 1000 V for added protection

Expanded range: 90 V to 1000 V AC or 200 V to 1000 V AC depending on model

20 V to 90 V AC control circuit model also available

Pemesanan Dan Informasi Hub. Harytan
021.71601997 - 081806120636 - 2975C3A4
Fax.021.7318012 - email. alatsurveykita61@gmail.com

Fluke 9062 Motor & Phase Rotation Indicator - 081806120636 - 021.71601997

Fluke 9062 Motor & Phase Rotation Indicator - 081806120636 - 021.71601997

Technical Specifications
Voltage range	Up to 400 V
Phase Display	120-400 V AC
Frequency range	2-400 Hz
Operating timer	Continuous

Environmental Specifications
Operating temperature	0 °C to 40 °C
Operating Altitude	Up to 2000m
Humidity (Without Condensation)	15 % to 80 %
Dust/water resistance	IP 40

Safety Specifications
Electrical Safety	EN 61010,  EN 61557-7
Overvoltage category	CAT III, 300 V

Mechanical & General Specifications
Size	124 x 61 x 27 mm
Weight	1 x 9 V
Batteries	1 x 9 V

Pemesanan Dan Informasi Hub. Harytan
021.71601997 - 081806120636 - Pin.2975C3A4
Fax.021.7318012 - Email.alatsurveykita61@gmail.com

Fluke 9040 Phase Rotation Indicator 021.71601997 - 081806120636

Fluke 9040 Phase Rotation Indicator  021.71601997 - 081806120636

Technical Specifications
Voltage range	40-700 V
Frequency range	15-400 Hz
Operating timer	Continuous

Environmental Specifications
Operating temperature	0 °C to 40 °C
Dust/water resistance	IP 40

Safety Specifications
Electrical Safety	EN 61010,  EN 61557-7
Overvoltage category	CAT III, 600 V  CAT IV, 300V

Mechanical & General Specifications
Size	124 x 61 x 27 mm
Weight	200 g
Power supply	From unit under test

Pemesanan dan Informasi Hub. Harytan
021.71601997 - 081806120636 -Pin.2975C3A4
Fax.021.7318012 , Email.: alatsurveykita61@gmail.com

Fluke 114 Electrical Multimeter -021.71601997 - 081806120636

Specifications
Maximum voltage between any terminal and earth ground	600 V
Surge protection	6 kV peak per IEC 61010-1 600 VCAT III, Pollution Degree 2
Display	Digital:  6,000 counts, updates 4 per second
Bar graph	33 segments, updates 32 per second
Operating Temperature	-10 °C to + 50 °C
Storage Temperature	-40 °C to + 60 °C
Battery type	9 volt Alkaline, NEDA 1604A/ IEC 6LR61
Battery Life	400 hours typical, without backlight

Accuracy Specifications
DC millivolts	Range:  600.0 mV Resolution:  0.1 mV Accuracy:  ± ([% of reading] + [counts]): 0.5% + 2
DC volts	Range/Resolution:  6.000 V / 0.001 V Range/Resolution:  60.00 V / 0.01 V Range/Resolution:  600.00 V / 0.1 V Accuracy:  ± ([% of reading] + [counts]): 0.5% + 2
Auto volts	Range:  600.0 V Resolution:  0.1 V Accuracy:  2.0 % + 3 (dc, 45 Hz to 500 Hz)4.0 % + 3 (500 Hz to 1 kHz)
AC millivolts1 true-rms	Range:  600.0 mV Resolution:  0.1 mV Accuracy:  1.0 % + 3 (dc, 45 Hz to 500 Hz)2.0 % + 3 (500 Hz to 1 kHz)
AC volts1 true-rms	Range/Resolution:  6.000 V / 0.001 V Range/Resolution:  60.00 V / 0.01 V Range/Resolution:  600.0 V / 0.1 V Accuracy:  1.0 % + 3 (dc, 45 Hz to 500 Hz)2.0 % + 3 (500 Hz to 1 kHz)
Continuity	Range:  600 Ω Resolution:  1 Ω Accuracy:  Beeper on < 20 Ω, off > 250 Ω; detectsopens or shorts of 500 μs or longer.
Ohms	Range/Resolution:  600.0 Ω / 0.1 Ω Range/Resolution:  6.000 kΩ / 0.001 kΩ Range/Resolution:  60.00 kΩ / 0.01 kΩ Range/Resolution:  600.0 kΩ / 0.1 kΩ Range/Resolution:  6.000 MΩ / 0.001 MΩ Accuracy:  0.9 % + 1 Range/Resolution:  40.00 MΩ / 0.01 MΩ Accuracy:  5 % + 2

Notes:
1) All ac voltage ranges except Auto-V/LoZ are specified from 1 % to 100 % of range. Auto-V/LoZ is specified from 0.0 V.
2) Temperature uncertainty (accuracy) does not include the error of the thermocouple probe.
3) Frequency is ac coupled, 5 Hz to 50 kHz for ac voltage. Frequency is dc coupled, 45 Hz to 5 kHz for ac current.
4) Temperature Range/Resolution: -40 °F to 752 °F / 0.2 °F

Mechanical & General Specifications
Size	167 x 84 x 46 mm (6.57" x 3.31" x 1.82")
Weight	550 g

Fluke 1630 Earth Ground Clamp Meter - 081806120636 - 2975C3A4 -021.71601997

Fluke 1630 Earth Ground Clamp Meter  - 081806120636 - 2975C3A4 -021.71601997

General Specifications
Operating error	Refers to the operating temperature range and is guaranteed for 2 years
Storage temp. range	-20 °C to 60 °C (-4°F to 140 °F)
Reference temp. range	23 °C ± 5 °C (73 °F ± 9 °F)
Storage humidity	<75 % Rh
Operating humidity	<85% Rh
Display	999 digital LC display with special symbols
Protection	IP30 according to IEC 529/EN 60529
Safety	300 V, CAT III pollution degree 2 IEC 61010-1 and IEC 61010-2-032
Weight	750 g (1.165 lbs)
Conductor size	35 mm (1.38 in) approximately
Dimension (length x width x depth)	276 mm x 100 mm x 47 mm (10.8 in x 3.9 in x 1.9 in)
Emission	IEC 1000 4-2, IEC 61326-I class B
Immunity	IEC 61000-4-2, 8 kV (air) criteria A  IEC 61000-4-3, 3 V/m performance criteria A
Range selection	Auto
Overload indicator	"OL" on display
Measuring time	0.5 sec
Measuring frequency	3.333 kHz
Battery type	9 V alkaline (type IEC 6 LR 61)
Battery life	≥ 8 hours (continuous operation)
Power consumption	40 mA
Low battery indication	Display symbol

Ground Loop Resistance (Autorange)
Range	Accuracy (± % of reading Ω)
0.025 - 0.250 Ω	± 1.5 % rdg ± 0.02 Ω
0.250 - 9.999 Ω	± 1.5 % rdg ± 0.05 Ω
10.00 - 99.99 Ω	± 2.0 % rdg ± 0.3 Ω
100.0 - 199.9 Ω	± 3.0 % rdg ± 1.0 Ω
200.0 - 400.0 Ω	± 5.0 % rdg ± 5 Ω
400.0 - 600.0 Ω	± 10 % rdg ± 10 Ω
600.0 - 1500 Ω	± 20 %
Note:	Loop resistance with no inductance, external magnetic field < 50A/m, external electrical field < 1 V/m, conductor centered.

Fluke 1621 Earth Ground Tester - 021.71601997 - 081806120636

Fluke 1621 Earth Ground Tester -  021.71601997 - 081806120636 The Fluke 1621 is an easy-to-use earth ground tester. For ground resistance testing, the 1621 is the first line of defense in detecting reliable ground connections. The unit features basic ground testing methods including 3-pole Fall-of-Potential as well as 2-pole ground resistance tests. Its convenient size, rugged holster, and large, clear LCD display make it an ideal field earth ground tester, for most electrical grounding work environments. With a simple user interface and intuitive functionality, the Fluke 1621 is a handy grounding tool for electrical contractors, utility test engineers, and earth ground specialists.

Measuring functions  3-pole earth ground resistance, 2-pole ac resistance of a conductor, Interference voltage Intrinsic error  Refers to the reference temperature range and is guaranteed for one year Measuring rate  2 measurements/second Battery[1]  One 9 volt alkaline (LR61) Battery condition  LO-BAT is displayed if voltage drops below 6.5 V Voltages Between jacks H/C2 and E/C1:  250 Veff maximum (effective voltage) Between jacks S/P2 and E/C1:  250 Veff maximum Climatic class  VDE/VDI 3540 RZ (conforming to KWG as per DIN 40040, 4/87) Temperature performance[2] Working:  -10 °C to +50 °C (+14 °F to +122 °F) Operating:  0 °C to +35 °C (+32 °F to +95 °F) Storage:  -20 °C to +60 °C (+68 °F to +140 °F) Reference:  +23 °C ± 2 °C (+73 °F ± 4 °F) Temperature coefficient  ± 0.1 % of range per degree Kelvin Safety  IEC/EN 61010-1, 600 V CAT II, pollution degree 2 Dimensions  113 mm x 54 mm x 216 mm (4.5 in x 2.1 in x 8.5 in), including holster Weight  850 g (1.9 lb), including standard accessories, volume approximately 600 cm3 Note:  [1]If the tester is not going to be used, or is being stored for a long period, remove the battery and store separately from the tester to avoid damage from battery leakage. Note:  [2]The four temperature ranges for the tester exists to satisfy European Standards requirements; the instrument can be used over the full working temperature range by using the temperature coefficient to calculate accuracy at the ambient temperature of use. Electrical specifications Maximum deviations: E1 Influence factor  Position E1 Deviation influence  0 % E2 Influence factor  Supply voltage E2 Deviation influence  0 % E3 Influence factor  Temperature E3 E3 Deviation influence  2.3 % E4 Influence factor  Serial interference voltage (20 V) E4 Deviation influence  0.6 % E5 Influence factor  Probe- and auxiliary probe resistance E5 Deviation influence  10 % Test voltage  3.7 kV Protection type  IP 40; IEC/EN 60529 Electromagnetic compatibility  Emission: IEC/EN 61326 Class B  Immunity: IEC/EN 61326 Annex C RE resistance measurement Measuring method  Current-voltage measurement with improved cross-talk attenuation, no compensation of measuring lead resistance, with probe (3-pole) or without probe (2-pole), as per IEC/EN 61557-5 Open circuit voltage  23 to 24 V ac Short circuit current  > 50 mA ac Measuring frequency  128 Hz Maximum permissible overload  250 Veff Measuring time  8 seconds (average from when START is pressed) Limit input  Tester retains set value even if instrument is turned off (assuming battery power supply is sufficient) Automatic changeover of resolution RH  < 7 kΩ Resolution  0.01 Ω RH  < 50 kΩ Resolution  0.1 Ω RH  > 50 kΩ Resolution  1 Ω Interference voltage display dc + ac Vmax  30 Veff Common mode rejection  > 80 dB at 50 Hz and 60 Hz Ri  680 kΩ Measuring uncertainty  < 10 % for pure ac and dc signals Measuring range 0.15 Ω to 20 Ω Resolution  0.01 Ω Display range  0 to 19.99 Ω 200 Ω Resolution  0.1 Ω Display range  20 to 199.9 Ω 2 kΩ Resolution  1 Ω Display range  200 to 1999 Ω Intrinsic uncertainty  ± (6 % of measured value + 5D) Operating uncertainty IEC 61557[1]  ± (18 % of measured value + 5D) Notes:  [1] Covers all deviations caused by influence quantities E1-E5. If the deviation E4 caused by high probe or auxiliary probe resistance is higher than specified flashes. Measured values are outside of the specified operating uncertainty.